Faction 3.Zero 2014/2015
Другие сезоны: 2012/2013 2013/2014 2014/2015Фрирайд
1.8MM EDGES
Used on 99% of our skis, the 1.8mm hardened steel edges are strong and dependable.
DIE-CUT PTEX 4000
Used on most of our skis. Sintered PTEX 4000 base material is more porous and holds wax better.
DIGITAL PRINTING
Used on our core and womens models, digital printing provides greater flexibility for designing complex graphics and requires no setup process, however the colours are not as bright or strong as the silkscreen method.
FIBREGLASS
Laminates such as fbreglass or carbon-fbre are used to compliment the properties of the core material by increasing torsional strength, edge-grip and rebound.
MATTE EC4060 TOPSHEET
Matte EC4060 topsheets require no lacquering saving around 100gm / pair, and reduces the use of not-quite-environmentally friendly lacquer. It also shows through the natural structure of the underlying laminate layers.
POPLAR WITH ASH STRINGERS
Our standard core material. Poplar is a medium-weight, damp, vibration-absorbing softwood. Ash is a heavier hardwood that compliments the Poplar by increasing stiffness, responsiveness and providing a solid base for the binding screws.
SANDWICH CONSTRUCTION
Used on most of our skis. A traditional manufacturing method that provides strength, durability, good grip and edge hold. Rubber is used to dampen vibration and bond the base layers to the core.
TIP & TAIL ROCKER
Tip & tail rocker with varying amounts of camber underfoot gives maximum versatility and float off-piste.
Райдеры нашей команды сделали эту модель основной в нашей линейке, демонстрирующей прогресс в этом виде спорта. Имея талию 112 мм, полностью симметричный дизайн и 3 различных ростовки, модель «3.Zero» можно рекомендовать для бэк-кантри фристайла. Профиль райдера: 25% - парки и горы, 75% - пухляк
579 €
- (?)
SP (ski points) - ски пойнты. Наберите 250 SP и получите недельный скипасс!
Подробнее тут»