Faction Candide Thovex 3.0 2014/2015
Фрирайд
1.8MM EDGES
Used on 99% of our skis, the 1.8mm hardened steel edges are strong and dependable.
BALSA/FLAX
Balsa is an exceptionally light hardwood. Laminated vertically together divided by strips of woven flax (also known as linseed), to provide additional torsional and compression strength. Lighter than Poplar/Ash but more expensive.
DIE-CUT PTEX 4000
Used on most of our skis. Sintered PTEX 4000 base material is more porous and holds wax better.
FIBREGLASS
Laminates such as fbreglass or carbon-fbre are used to compliment the properties of the core material by increasing torsional strength, edge-grip and rebound.
MATTE EC4060 TOPSHEET
Matte EC4060 topsheets require no lacquering saving around 100gm / pair, and reduces the use of not-quite-environmentally friendly lacquer. It also shows through the natural structure of the underlying laminate layers.
ONE-PIECE PHENOL PLATES
Used on our Agent & Candide Thovex series, phenol is a hard plastic material that secures the binding screws. The one-piece design fits most touring bindings with centre screws.
SANDWICH CONSTRUCTION
Used on most of our skis. A traditional manufacturing method that provides strength, durability, good grip and edge hold. Rubber is used to dampen vibration and bond the base layers to the core.
SILKSCREEN PRINTING
Used on 90% of our skis, silkscreen printing provides bright, strong colours that help our skis pop off the walls in-store. Unlike the sublimation process used by many of our competitors, very little waste is created using this method, and water-based inks are used to reduce environmental impact.
TIP & TAIL ROCKER
Tip & tail rocker with varying amounts of camber underfoot gives maximum versatility and float off-piste.
649 €
- (?)
SP (ski points) - ски пойнты. Наберите 250 SP и получите недельный скипасс!
Подробнее тут»