Faction Prodigy 2014/2015
Другие сезоны: 2011/2012 2013/2014 2014/2015Фрирайд
1.8MM EDGES
Used on 99% of our skis, the 1.8mm hardened steel edges are strong and dependable.
DIE-CUT PTEX 4000
Used on most of our skis. Sintered PTEX 4000 base material is more porous and holds wax better.
FIBREGLASS
Laminates such as fbreglass or carbon-fbre are used to compliment the properties of the core material by increasing torsional strength, edge-grip and rebound.
LACQUERED ICP2112 TOPSHEET
Used on most of our skis, gloss lacquered ICP2112 topsheets are colourfast and look great. The lacquer is applied to the ski after pressing.
POPLAR WITH ASH STRINGERS
Our standard core material. Poplar is a medium-weight, damp, vibration-absorbing softwood. Ash is a heavier hardwood that compliments the Poplar by increasing stiffness, responsiveness and providing a solid base for the binding screws.
SANDWICH CONSTRUCTION
Used on most of our skis. A traditional manufacturing method that provides strength, durability, good grip and edge hold. Rubber is used to dampen vibration and bond the base layers to the core.
SILKSCREEN PRINTING
Used on 90% of our skis, silkscreen printing provides bright, strong colours that help our skis pop off the walls in-store. Unlike the sublimation process used by many of our competitors, very little waste is created using this method, and water-based inks are used to reduce environmental impact.
STP Technology
STP Technology is a patent-pending process used to press a small wave into the length of the ski. This creates a ‘pre-stressed’ core with increased torsional strength, letting us use less wood to create lighter, more forgiving skis with above-average edge-grip.
For 14/15, we have developed a variation of the technique that provides a perfectly flat base.
TIP & TAIL ROCKER
Tip & tail rocker with varying amounts of camber underfoot gives maximum versatility and float off-piste.
559 €
- (?)
SP (ski points) - ски пойнты. Наберите 250 SP и получите недельный скипасс!
Подробнее тут»